Centring Plunge Facing Machine

Fully Automatic Centering Plunge Facing Machine

Model - CFAM-500-1000



This machine is very useful in the after-cutting processes of rods. The centering plunge facing machine is used to make the cut rod smooth & equal as these rods when cut into pieces are not smooth & equal.


 Admitted work length
with Single vice min
with Double vice min
with Double vice max.
 40 mm
110 mm
500 mm
 Min. job dia. clamped in vice15 mm
Max. job dia. clamped in vice125 mm
 Job Clamping systemSelf Centering vice by  Hydraulic motor force  2000 kg.
 Rapid Travel Speed4200 mm/min
Spindle speeds750, 1000 RPM
Max. Stroke of Slide50 mm
Slide FeedingInfinitely variable with  hydraulic.
Max. Plunge face Diameter63 mm
Centre Drill SizesBSS3 TO BSS6/as per ISI
Total Machine Power
 • Spindle Power
 • Hydraulic Motor Power
10.15 H.P
 3 H.P/each
 3 H.P
Coolant Motor0.15 H.P/40 lpm
Overall Size LxWxH2000 / 1300 / 1600
Machine Weight1250 Kgs.

Additional Information

Head Stock :

Two Spindles are supporated by two taper roller bearigs at both sides. Both head stock are slide feed by Hydraulic. One head stock permanently fixed & other is adujustable to accommodate different job length. Drive is by timing belt. Change of speeds is changing timing pulley.

Tool Holders :

Facing tools are indexable insert type. Centre drill holders is used to hold and adjust centre drill. Depending on application, Chamfering, O.D. Turning, tools can be supplied.

Vices :

The job is clamped by to self centering vice assy. (LH/RH scres with G.M.T nut / V-flat Jaws.) The vice screw are rotated by hydraulic motor.

Machine Bed and Rack Pinion system :

The box and cross ribbed bed with toughened guide ways ensures rigidity of machine bed. Rack and pinion systems is given to adjust vice assy, adjustable headstock to required length.